# Example mtools.conf files. Uncomment the lines which correspond to # your architecture and comment out the "SAMPLE FILE" line below #SAMPLE FILE # # Linux floppy drives drive a: file="/dev/fd0" exclusive drive b: file="/dev/fd1" exclusive # # First SCSI hard disk partition # drive c: file="/dev/sda1" # # First IDE hard disk partition # drive c: file="/dev/hda1" # # dosemu floppy image # drive m: file="/var/lib/dosemu/diskimage" # # dosemu hdimage # drive n: file="/var/lib/dosemu/diskimage" offset=3840 # # Atari ramdisk image # drive o: file="/tmp/atari_rd" offset=136 # # ZIP disk for Solaris: # Drive X is ZIP-100 at target 5 # drive X: file="/dev/rdsk/c0t5d0s2" partition=4 scsi=1 nodelay # # ZIP disk for SunOS: # # Zip drive is at target 5, which default kernel calls tape st1 !! # drive Y: file="/dev/rsd5c" partition=4 scsi=1 nodelay # # autoselect zip drive/floppy on HP-UX 9/10 # drive a: file="/dev/rdsk/c201d5" exclusive partition=4 # drive a: file="/dev/rdsk/c201d5s0" exclusive partition=4 # drive a: file="/dev/rfloppy/c201d0s0" exclusive # A/UX target 5 on 1st scsi bus jaz or zip # drive X: file="/dev/rdsk/c105d0s31" partition=4 # Some examples for BeOS. # floppy drive. hardcoded in devices.c, so no real need to define it here #drive a: file="/dev/floppy_disk" exclusive # ZIP drive on SCSI ID 6 #drive z: file="/dev/scsi_disk_060" offset=16384 fat_bits=16 # SCO Unix 3.2v4 # # Floppy disk drives # # drive a: file="/dev/install" exclusive # drive b: file="/dev/install1" exclusive # # # SCSI hard disk partitions # # drive c: file="/dev/dsk/0sC" # drive d: file="/dev/dsk/0sD" # drive e: file="/dev/dsk/0sE" # drive f: file="/dev/dsk/0sF" # drive g: file="/dev/dsk/0sG" # drive h: file="/dev/dsk/0sH" # # uncomment the following line to display all file names in lower # # case by default # mtools_lower_case=1